Bac Français 2014

PART 1. INTRODUCTION

List of valid pages

Modification sheet

CONTENT

PART 1. INTRODUCTION        2

List of valid pages        2

Modification sheet        2

Definition of terms        4

INTRODUCTION        5

Acronyms        6

Part 2 DESCRIPTION OF THE DESIGN        7

2.1 Classification, purpose of the aircraft        8

2.2 General Information        8

2.3 Basic geometric dimensions        10

2.4 Airframe        11

2.5        Poweplant        13

2.6        Landing gear and hydraulic system        14

2.7 Electrical system        16

2.8 Instrumentation        17

2.9 Utility-type and rescue equipment        21

PART 3 OPERATING LIMITATIONS        23

3.1 Weight and balance        24

3.2 Number of crew members        25

3.3 Speeds        26

3.4 Flight altitude        27

3.5 Load factor        27

3.6 Maneuvering        27

3.7 Types of flights        27

3.8 Meteorological conditions        27

3.9 Aerodromes        28

3.10 Power plant        29

Part4 STANDARD PROCEDURES        31

4.1 Pre-flight inspection        32

4.2 Starting and shutting down the engine        34

4.3 Taxiing        36

4.4 Take-off        37

4.5 Climb        38

4.6 Level flight        39

4.7 Aerobatics        40

4.8 Descent        41

4.9 Landing        42

4.10 Go-around (balked landing)        44

4.11 After flight procedure        45

Part 5.   EMERGENCY PROCEDURE        47

5.1 Use of rescue system        48

5.2 Engine failure on the ground        49

5.3 Engine failure at low altitude        49

5.4 Engine failure at a high altitude        49

5.5 Fire in the engine compartment on ground        50

5.6 Fire in the engine compartment in flight        50

5.7 Fire in the cabin        50

5.8 Unintentional spin        51

PART 6.    ACTIONS IN COMPLicated SITUATIONS        53

6.1 Forced landing        54

6.3 Impairment of visibility        55

6.4 Icing        55

6.5 Pitot tube malfunction        56

6.6  Failure of the primary flight navigation system        56

6.7 Power supply failure        56

6.8 Rudder trim tab failure        56

6.9 Flap failure        57

Part 7.  AIRCRAFT PERFORMANCE        59

7.1 Introduction        60

7.2 Take-off        61

7.4 Climb        64

7.5 Descent        65

7.6 Flight range and duration        66

Definition of terms

Critical and particular instructions are listed as the “CAUTION”, “WARNING”, and “NOTE” warnings in bold italic characters. The importance of the instructions is additionally emphasized by color marking (respectively red, brownish and green) of the text block. Below are definitions of each of these terms.

...